Sun Metals | Pick and Place Robotic System

November 19, 2026

Project Overview


Industry: Mining, Smelting & Refining

Application: Robotic Pick and Place Automation

System Delivered: KUKA Robotic Zinc Ingot Handling & Stacking System



Industrial Automation Australia partnered with Sun Metals to modernise its Zinc Slab production line, replacing an ageing robotic system with an upgraded KUKA robotic automation solution.


The objective was to improve material handling efficiency, enhance stacking accuracy, reduce manual intervention and introduce greater flexibility into the production process.


The Challenge


Sun Metals' existing robotic system had been operating for approximately 15–16 years and required an upgrade to meet evolving production requirements.


The existing system presented several opportunities for improvement:

  • Ageing robotic technology requiring modernisation.
  • Limitations in production flexibility and automation functionality.
  • Need to improve material handling and stacking efficiency.
  • Manual intervention required for missing and rejected ingots.
  • Requirement for improved system reliability and production consistency.


Sun Metals required a modern automation solution capable of handling varying production conditions while maintaining consistent stacking operations.


The Engineering Approach


Industrial Automation Australia applied a structured engineering approach, beginning with an assessment of the existing production process and the customer's operational requirements.


The project involved:

  • Reviewing existing production processes and automation requirements.
  • Configuring KUKA robot movements, grippers and stacking positions.
  • Developing automated picking, placing and product rejection sequences.
  • Integrating robot controllers with the existing PLC and conveyor systems.
  • Conducting Factory Acceptance Testing (FAT) to validate functionality.
  • Completing site installation, commissioning and Site Acceptance Testing (SAT).
  • Providing operator training and system handover.


Testing covered different production scenarios, including missing ingots, rejected products, makeup operations and automatic stacking.


The Solution


Industrial Automation Australia programmed, integrated and commissioned a new KUKA robotic automation system for Sun Metals' Zinc Slab production line.


The system incorporated:

  • Automated Zinc Ingot Handling: Robotic picking and transferring of ingots from the infeed conveyor.
  • Dual Stacking Positions: Automated stacking at two designated positions, Stack 1 and Stack 2.
  • Makeup Operations: Automatic replacement of missing ingots using a dedicated makeup table.
  • Product Rejection: Automated identification and removal of wafer products and unsuitable ingots into a designated reject bin.
  • PLC Integration: Communication and handshaking between the KUKA robot controllers and the production line PLC.
  • System Commissioning: Robot calibration, programming adjustments, testing and operational verification.
  • Operator Training: Practical training covering robot operation, recovery procedures and basic troubleshooting.


The completed system was tested under actual site conditions to verify the required production sequences and operational functionality.



The Results


Measurable Operational Improvements


The upgraded robotic system delivered several key improvements:

  • Replaced an ageing 15–16-year-old robotic system with modern KUKA automation.
  • Automated Zinc ingot picking, handling and stacking.
  • Introduced automatic makeup operations for missing ingots.
  • Improved product rejection and good/bad bin management.
  • Enabled coordinated stacking across two designated positions.
  • Established integrated robot and PLC communication.
  • Successfully completed FAT and SAT testing.
  • Improved production flexibility and reduced the need for manual intervention.


The result was a modernised robotic handling system designed to improve consistency, reliability and automation capability across the Zinc Slab production line.


Operational Impact


Beyond modernising the existing equipment, the project delivered several operational benefits:

  • Reduced Manual Intervention: Automated ingot handling, makeup and rejection processes.
  • Improved Process Consistency: Programmed sequences for repeatable product handling and stacking.
  • Greater Production Flexibility: Support for different product conditions and two stacking positions.
  • Modernised Technology: Replaced ageing robotic equipment with an upgraded KUKA system.
  • Improved Operator Support: Provided training in system operation, fault recovery and troubleshooting.


The upgrade provides Sun Metals with a more flexible and modern robotic automation platform to support its ongoing Zinc Slab production requirements.


Client Outcome Summary


Sun Metals transitioned from an ageing robotic system to an upgraded KUKA robotic automation solution delivering:


  • Modernised robotic technology.
  • Automated Zinc ingot handling and stacking.
  • Improved product rejection and makeup operations.
  • Greater production flexibility.
  • Reduced manual intervention.
  • Improved operational consistency.


The project demonstrates how targeted robotic upgrades and structured engineering can modernise existing manufacturing processes and improve long-term automation capability.


Ready to Transform Your Pick and Place Process?


If your operation relies on repetitive material handling, manual product sorting or ageing robotic equipment, a structured Design Study can identify opportunities to improve productivity, consistency and workplace safety.


Industrial Automation Australia designs and integrates robotic automation solutions that help manufacturers modernise operations, reduce manual handling and achieve more efficient production processes.

Find Us On Facebook www.localsearch.com.au
Yellow Industrial Robot Arms — Industrial Automation Australia in Eagle Farm, QLD
May 2, 2024
Following installation, we provided comprehensive training to enable Blade Pile’s staff to operate the machinery effectively. Call us to know more.